The T-Max® Manager Pro is the front desk control unit for the T-Max® Series. It can be connected to
up to 64 T-Max 3As to control up to 64 tanning beds in a single salon. The T-Max® Manager/Pro has 64 dual-colored lights showing bed status. If the light for a certain bed is green, the bed is ready for a new session. If the light is red, the bed needs to be cleaned. If the light is flashing red, there is less than two minutes left in the session. If the light is flashing green, the T-Max 3A is in the cool-down mode. If the light is off, that bed is not available. A 16x2 easy to read Vacuum Fluorescent Display (VFD) shows the exact status of a given bed. A 16 key keypad allows for manual session control. The T-Max® Manager/Pro can be used manually or be controlled with a PC using today's most popular tanning software. Information such as session counts, lamp hours, and bed hours can be monitored and changed either with a PC or using the T-Max® Manager/Pro manually.
T-Max 3A Remote Timer
The T-Max 3A remote timer system includes a wall mounted control panel and phone style cord to
connect to the remote timer port of your commercial ready tanning bed. Requires a 120V outlet to plug in the unit. Up, Down, and Start/Stop buttons allow for easy control of your tanning bed. Terminals that screw down provide flexible and easy wire connections. All parameters, such as lamp hours, session counts, bed hours, etc. can be accessed and changed right on the T-Max 3A. All these features provide an easy to install and inexpensive way to control a tanning bed from the front desk of your salon.
